Post by Admin on Mar 12, 2016 23:34:52 GMT
The CEHISA Flexy
Daltons Wadkin
The CEHISA Flexy is a hot melt compact automatic through-feed edgebander suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 2mm. An intuitive 3.5″ touch screen control gives the operator quick access for monitoring all machine functions – start/ stop, program editing, parameters check and editing, alarm diagnostics etc all in real time.
Panels are fed through the machine with an industrial chain-track system running on ground steel guides. Non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronised top pressure beam with two sets of rollers keeps the panel secured against the track.
As standard the four models within the Flexy range all include the following;
Feeding unit
roll tray for edging
precision timed automatic edging feed minimising wastage
pneumatic cut-off guillotine
Glue application unit (M-2NS)
new design with improved thermodynamics for quicker heating
quick change system for swapping the unit over in less than 60 seconds
full TEFLON coating
molten glue injected at the upper and lower points of the application roller where inbuilt heating elements maintain optimum application temperature
automatic temperature control by electronic thermostat to prevent scorching of glue while machine idle
1.5 kg glue tank capacity of solid aluminium casting machine to a smooth finish to allow uninterrupted glue flow
optional DUMELT system for use of both EVA and PUR adhesives
Pressure rollers
two rollers exert pressure to the edging against the panel to achieve adhesion
first roller is driven, the second is idle
End trimming unit (V-2)
high frequency sawing unit running at 12,000 rpm trims the ends of the edging flush to the panel
precision prismatic guides ensure continual accuracy and durability
Top and bottom trimming units (JC-2)
two high frequency sawing units running at 12,000 rpm trim the excess edging from the top and bottom of the panel
each unit equipped with TC insert milling heads
roller type tracers work with high gloss and 3D effect panels and edges
Optional working units are available on the Flexy C, Flexy P, and Flexy PC including;
Pre-milling unit
two high frequency milling units with pneumatic pressure control clean the panel edge prior to the edging application for optimum finish
Corner rounding unit (CR-2)
designed to round the four points of the panel edge for a complete finish
not recommended for edging over 2mm or more soft-formed or post-formed profiles
Glue scraper unit (RR-8)
removes residual glue from the top and bottom of panel surface
two separate blade holders with independently adjustable copying devices
air cleaning to tracers
Buffing unit (PC-2)
restores the PVC/ ABS edge colour and polishes it after the trimming and scraping operations
two independent units with tilting motors running at 1500 rpm power the 100mm diameter cotton buffers
www.daltonswadkin.com/products/cehisa-flexy/
Daltons Wadkin
Daltons Wadkin
The CEHISA Flexy is a hot melt compact automatic through-feed edgebander suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 2mm. An intuitive 3.5″ touch screen control gives the operator quick access for monitoring all machine functions – start/ stop, program editing, parameters check and editing, alarm diagnostics etc all in real time.
Panels are fed through the machine with an industrial chain-track system running on ground steel guides. Non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronised top pressure beam with two sets of rollers keeps the panel secured against the track.
As standard the four models within the Flexy range all include the following;
Feeding unit
roll tray for edging
precision timed automatic edging feed minimising wastage
pneumatic cut-off guillotine
Glue application unit (M-2NS)
new design with improved thermodynamics for quicker heating
quick change system for swapping the unit over in less than 60 seconds
full TEFLON coating
molten glue injected at the upper and lower points of the application roller where inbuilt heating elements maintain optimum application temperature
automatic temperature control by electronic thermostat to prevent scorching of glue while machine idle
1.5 kg glue tank capacity of solid aluminium casting machine to a smooth finish to allow uninterrupted glue flow
optional DUMELT system for use of both EVA and PUR adhesives
Pressure rollers
two rollers exert pressure to the edging against the panel to achieve adhesion
first roller is driven, the second is idle
End trimming unit (V-2)
high frequency sawing unit running at 12,000 rpm trims the ends of the edging flush to the panel
precision prismatic guides ensure continual accuracy and durability
Top and bottom trimming units (JC-2)
two high frequency sawing units running at 12,000 rpm trim the excess edging from the top and bottom of the panel
each unit equipped with TC insert milling heads
roller type tracers work with high gloss and 3D effect panels and edges
Optional working units are available on the Flexy C, Flexy P, and Flexy PC including;
Pre-milling unit
two high frequency milling units with pneumatic pressure control clean the panel edge prior to the edging application for optimum finish
Corner rounding unit (CR-2)
designed to round the four points of the panel edge for a complete finish
not recommended for edging over 2mm or more soft-formed or post-formed profiles
Glue scraper unit (RR-8)
removes residual glue from the top and bottom of panel surface
two separate blade holders with independently adjustable copying devices
air cleaning to tracers
Buffing unit (PC-2)
restores the PVC/ ABS edge colour and polishes it after the trimming and scraping operations
two independent units with tilting motors running at 1500 rpm power the 100mm diameter cotton buffers
www.daltonswadkin.com/products/cehisa-flexy/
Daltons Wadkin